Lisbonne Faucet - 4-Way - Stainless Steel and Economical

Introducing the 4-way faucet: Cold water, hot water, RO water, and an additional water outlet of your choice 

This faucet is made primarily of brass. The joints are stainless steel.

4 ways:
- hot water
- cold water
- RO water
- RO water, hydrogen water, water for your garden, or mineralized water

4-Way Faucet Specifications 

Faucet dimensions

You receive:

Your RO water faucet comes with the installation hardware you need

- 3 flexible hoses, including 1 with a 1/4 fitting for the third water line

- 1 spray head

- 2 gaskets

- 1 washer

- 1 bolt

- 1 base with gasket

3-way faucet installation video

Video transcript - Installing your 3-way faucet

Here are all the accessories included with your 3-way faucet.

• The faucet,
• the 3 mounting pieces,
• the base,
• the 3 flexible hoses, one of which has a special fitting for quarter-inch tubing.

Start by taking your faucet and attaching the cold and hot water hoses on one side and the RO water hose on the other.

Then attach the 2 mounting rods, tightening them with a flathead screwdriver and removing the 2 nuts.

Place the support ring over the standard-diameter hole in your sink, then position the faucet, making sure to feed all 3 hoses through the hole.

Under the sink, position the rubber and metal mounting pieces, passing the mounting rods through the designated holes.

Screw on the nuts and tighten them securely to hold the faucet firmly in place.

Finally, connect the faucet hoses to the cold water, hot water, and RO water lines.

Make sure to tighten everything securely and use Teflon on the standard water supply connections.

And there you have it, your faucet is ready to use.